kitchen cabinet dish rack singapore

Aluminium Kitchen Cabinets Price in Singapore (2026): What Affects Cost + How to Get an Accurate Quote

modern aluminium kitchen cabinet wall unit Singapore

At T Se7en Alucraft, aluminium kitchen cabinets are priced per foot run, starting from S$240. A typical 4-room BTO kitchen costs S$5,000 to S$20,000 for cabinets, before countertop and GST.

Where your kitchen lands in that range depends on six things: total length, layout shape, tall units, detailing, finishes, hardware and installation conditions. This page shows how each one moves the number, walks through a real BTO quote line by line, and gives you a checklist for comparing quotes from different suppliers.

If you are still deciding on material, start with our overview of aluminium kitchen cabinets.

How aluminium cabinet pricing works in Singapore

Most Singapore suppliers quote cabinets by the foot run or meter run: the length of cabinetry measured along the wall. In some cases, top (wall) cabinets and bottom (base) cabinets are measured and priced separately, because bottom cabinets carry more weight, drawers and plumbing cut-outs.

Everything else is added on top of the foot-run rate:

  • Tall units such as a pantry tower or oven housing, usually priced at a higher rate because more material and labour are used. 
  • Accessories such as pull-out baskets, dish racks and corner systems, priced per item, which highly depends on which brands you purchase too. Just like getting a car, you can get a Toyota or a Ferrari, despite both being a car.
  • Finish upgrades beyond the standard colour range with lamiate, trimming, inlays, detailings, or finishes.
  • Countertop, which matters more than you think because there are different materials in the market which swings costings differently. 
  • Dismantling and disposal of your old kitchen, as and when needed

A quote that gives only one total, with no foot-run breakdown, is hard for homeowners to check. Ask for a quote based on your floor plan, and the add-ons that you need. Specifically ask to leave out items that you don’t need, so contractors/IDs knows which material and labour is used less. 

Not sure which level you need? Our guide to modular vs custom aluminium cabinets.

Worked example: 4-room BTO kitchen, L-shape

This is a recent T Se7en Alucraft project in.The homeowners cook daily and wanted more storage without a full pantry wall.

Line item

Quantity

Top cabinets

14 ft

Bottom cabinets

14 ft

Tall unit (oven + microwave housing)

12 ft

Soft-close drawer stack

 12 qty

Pull-out basket

 4 qty

Dish rack

1

Installation

 

Total (cabinets only)

 

What they chose not to do: Instead of using sintered stone backsplash, they have opted for glass backing which was a material that cost significantly lesser. By forgoing aesthetics while keeping to functional principles, they were still able to achieve their initial goal of using sintered stone in the first place. That one decision saved roughly S$2,000 SGD. 

What we would point out: is that this decision may not work for everyone, because beauty is in the eye of the beholder. Just because a more cost effective material was used, it does not mean the material is bad. Instead, the cost effective material has been tested and proven by the market for many years.

Cabinets are only one part of a renovation budget. For the full picture, see our breakdown of HDB renovation cost in Singapore.

The 6 things that change your price most

  1. Total length and layout shape. Price follows foot run, so length matters more than flat type. Two 4-room BTO kitchens can differ by 10-15 ft of cabinetry depending on the layout the homeowner picks. L- and U-shapes add corners, and each corner needs either a blind unit or a corner system. Generally, a corner system can range between S$199 to S$599.
  2. Tall units. A full-height unit is often the single biggest add-on. It needs more panel, more hardware and secure anchoring to the wall. One oven tower is usually manageable; a full pantry wall can add S$1,000 to S$3,000 more.
  3. Finish. PET-G surface finishes cost the least. Wood-grain and special-effect finishes cost more, and mixing two finishes adds work. A common way to control cost is to use the premium finish only where it is seen most, such as the bottom cabinets or one feature panel.
  4. Hardware and accessories. Two kitchens that look the same can differ by S$3,000 because of drawer runners, hinges and pull-outs. Ask for brand and model on every hinge and runner. T Se7en Alucraft uses BLUM as a standard. (As of October 2026)
  5. Site conditions. Uneven walls, fixed plumbing or gas points, and tight access all add installation time. HDB flats also have rules on renovation works and noisy work hours. which affect scheduling. As a professional kitchen renovation contractor, we check these at the site measurement so they appear in the quote, not as a surprise later. Sources: Important Information on Renovations
  6. What is included. Dismantling, disposal, countertop, sink and tap installation, and post-install adjustment are included by some suppliers and excluded by others. This is the most common reason two totals look far apart.

Aluminium vs plywood: is aluminium more expensive?

Upfront, aluminium cabinets usually cost more than laminated plywood for the same layout. The difference decreases shows up over time, especially when the need to change a cabinet every 10-20 years goes away using aluminium cabinets.in the sink and dishwasher zone.

Factor

Aluminium

Laminated plywood

Water exposure

Does not swell or rot

Can swell if edges get wet

Termites

Not affected

Can be affected

Upfront cost (per ft run)

$200 – $700

$100-$500

Expected lifespan

No end-of-life reported yet

2-20 years depending on the grade of wood used

Repair if damaged

Usually the whole unit 

Usually the whole unit

Example: A customer took over a resale concrete kitchen cabinet which was working perfectly fine. However, the wooden doors and carcass were falling apart. Instead of replacing the plywood and concrete completely, we were able to do a partial replacement by tearing out what is needed, and replacing it with aluminium. This ensures the most amount of money saved while at the same time, least wastage and lowest cost. We were able to help reduce cost, and at the same time, giving the cabinet a new life.

How to compare two quotes line by line

A lower total usually means something is missing, not that the job is the same. Put both quotes side by side and check these eight lines:

  1. Top cabinet length (ft) and what it includes.
  2. Bottom cabinet length (ft) and what it includes.
  3. Tall units: how many, size, and what it includes.
  4. Finish type and which cabinets get which finish
  5. Hinge and drawer runner brand and model
  6. Accessories list, with item counts
  7. Installation scope: dismantling, disposal, plumbing and electrical coordination, cleanup.

If a line is missing from one quote, ask for it in writing before you decide.

Where to save money, and where not to

Save on: extra corner systems you will rarely open, a full pantry wall when one tall unit covers your needs, and premium finishes on top cabinets above eye level.

Do not save on: drawer runners and hinges in the cooking zone, which get opened dozens of times a day, and the cabinet under the sink, where water damage starts. Most common customer regrets after getting their cabinet is not deciding if they need more countertop space, or if they need more storage space. These can easily be balanced with the right planning.

Get an accurate quote

An exact price needs your measurements, layout and chosen spec. Here is how to get one:

  1. Request a site measurement after you have confirmed that the contractor can complete your work within your budget. We measure, check plumbing and gas points, and note anything that affects installation.
  2. Choose your finish and accessories. You can see them in person at our kitchen cabinet showroom,  showroom location 39 Woodlands Cl, #05-20, Singapore 737856
  3. Receive an itemised quote, with every line from the checklist above.

Planning a full kitchen renovation, not just cabinets? Talk to us about the whole job. You can also browse our full range of aluminium kitchen cabinets.

kitchen cabinet hardware singapore woodlands

Planning a full kitchen renovation, not just cabinets? Talk to us about the whole job. You can also browse our full range of aluminium kitchen cabinets.

How much do aluminium kitchen cabinets cost per foot run in Singapore?

At T Se7en Alucraft, standard top and bottom cabinets start generally from around $2,000 onwards, depending on the foot run/meter run. The rate rises with finish, hardware and accessories, as shown in the price guide above.

How much does a 4-room BTO kitchen cost with aluminium cabinets?

BTO kitchens fall between 5,000low and  $20,000 for cabinets only. Layout and tall units cause most of the difference.

Is the countertop included in the cabinet price?

No from our end, we generally seperate the costing for a clearer picture. Owners are also open to select their own choice of stone contractors not within our circle, if applicable.

Are your prices before or after GST?

We are GST registered company

Why are two quotes for the same kitchen so different?

Usually because they cover different scope. One may include tall units, soft-close hardware, dismantling and disposal; the other may not. Compare the eight lines in the checklist above, not the totals.

Are accessories like dish racks and pull-out baskets included?

We only add what homeowner needs for their home. No two home are the same.

Is modular or custom aluminium cabinetry cheaper?

Modular units cost less when your kitchen fits standard sizes. Custom work costs more but is more applicable to homeowners in singapore, as no two homes are the same especially for HDB where gaps happens beside a DB box or around a pillar.

Can I get an estimate without a site visit?

Yes, as a rough range. Send us your floor plan and the length of each wall, and we can estimate within 70-90% certainty. The final quote still needs you to visit our factory/showroom.

How long does it take from quote to installation?

Typical fabrication lead time, takes around 2-3 weeks, with 1-2 and how many days installation.

What warranty comes with the cabinets?

Follow our warranty guide here.

What should I prepare before asking for a quote?

Your floor plan, photos of your current kitchen, and a rough budget. A list of what you store most, such as pots, dry food or appliances, also helps us plan drawers and tall units.

Location: 39 Woodlands Cl, #05-21, Singapore 737856
Phone: +65 9615 9273
Email: marketing@tse7en.com

Website: https://www.tse7en.com

Follow Us on Social Media:

Still Unsure?

Speak to a professional now and get personalized consultation and guidance for your next renovation. Work with a team you can trust!

4 responses

Leave a Reply

Your email address will not be published. Required fields are marked *

Best Materials for Kitchen Cabinets in Singapore

Home Blog Laminate is the most common cabinet finish in Singapore kitchens, and for good reason: it’s affordable, comes in hundreds of colours and wood...